Peak NanoPlex™ Low Dissipation Factor Film (LDF)

High-Temperature Capacitor Films for High-Performance Capacitors

High-Temperature Capacitor Film Engineered for Grid Stability and Extreme Climates

LDF is a high-temperature capacitor film engineered to deliver 30–40°C more thermal headroom and dramatically longer service life than conventional materials, enabling reliable power delivery in grid substations, mobile systems, and electronics deployed in the world's most demanding climates.

Next Generation Low Dissipation Film

  • Rated Up to 135 Degrees Celsius

    Performs at higher operating temperatures with no derating.

  • Low Dissipation Factor (DF = 0.00025)

  • Built for Harsh Duty

    Handles thermal and mechanical stress with <1% shrinkage at 130°C.

  • Drop-In Ready

  • Up To 5x Longer Lifespan

  • U.S.-Engineered, Lab-Tested

What is NanoPlex™ LDF?

NanoPlex LDF is a capacitor film designed to outperform conventional BOPP. With a low dissipation factor and stable dielectric behavior up to 135°C, it’s engineered for high-frequency, high-temperature applications like fusion energy systems, EVs, renewables, HVDC, grid, and pulsed-power defense platforms.

Easily metallized and wound using existing infrastructure, LDF eliminates the need for major retooling. By extending operational lifetime and thermal reliability, it slashes maintenance costs and enables more compact, efficient system designs.

Trusted by Advanced Conversion for 800V+ SiC Inverters

Peak NanoPlex™ LDF vs. Traditional Capacitor Films

Feature / propertyTraditional Capacitor Film (BOPP)Peak Nano LDF Film
High-Temperature PerformancePerformance declines above 85°CRated for 135°C operation without derating
Dissipation FactorHigher losses under similar conditionsUltra-low: 0.03% at 25°C, 1kHz (ASTM D150)
Breakdown StrengthTypically 800 V/µm790 V/µm (ASTM D149)
Shrinkage StabilitySusceptible to dimensional drift above 100°CMinimal: <1% at 130°C (JIS K7133)
Mechanical StrengthLower strength in high-heat cycling160 MPa (MD) / 225 MPa (TD) (ASTM D638)
Thermal Fatigue ResistanceProne to failure and performance loss over timeMaintains energy delivery under repeated high-duty pulse loads
Film HandlingIndustry standardDesigned to metallize and wind like BOPP
Service LifeShorter life, especially at high frequency or temperature5x Longer life under thermal and electrical stress
Supply Chain~70% of global supply comes from China100% U.S.-based production with allied-sourced materials
Commercial ReadinessMature, but aging technology with performance limitsSample availability in 2025–2026, with production scale-up planned for 2027

Ready to Evaluate NanoPlex Films?

Request a Sample Kit

NanoPlex™ LDF 1400 Specifications

Typical values, measured on 6 micron film, from the Peak corpus when this page was built (November 20, 2026); 18 of 19 rows filled. *Based on 6 micron film

PropertyMethodUnitsLDF 1400
Dielectric ConstantASTM D150–2.3
Dissipation Factor @ 25ºCASTM D150%0.03
Dissipation Factor @ 135ºCASTM D150%0.03
Breakdown Strength @ 25°C ("in air" probe/ground plane method)IEC 60243V/micron685
Breakdown Strength @ 25°C (oil submersion method)ASTM D149V/micron790
Breakdown Strength @ 135°C (oil submersion method)ASTM D149V/micron710
Shrinkage MD/TD (120°C)JIS K7133%0.1/0.1
Shrinkage MD/TD (150°C)JIS K7133%1.8/1
Tensile Strength, MD/TDASTM D638MPa160/225
Young's Modulus MD/TDASTM D638MPa2000/320
Elongation at Break MD/TDASTM D638%100/44
Coefficient of Friction (Static)JIS K7125–0.5
Coefficient of Friction (Dynamic)JIS K7125–0.4
Surface Roughness (Ra)JIS B0601microns0.1
DensityASTM D792g/cc0.93
Maximum Temperature––pending
Thickness–micron3–12
Roll Width–millimeters375, 500
Film Length–meters500–3000

Frequently Asked Questions

How is NanoPlex LDF different from traditional BOPP capacitor film?

NanoPlex LDF offers a higher operational temperature range - up to 135°C - compared to BOPP’s ~85°C limit. It delivers a similar low dissipation factor (extended to 150°C) while enabling longer device lifetimes, smaller form factors, and more reliable high-temperature performance.

Does LDF work with existing winding and metallizing equipment?

Yes. LDF is engineered for compatibility with existing BOPP processing tools. It handles like standard BOPP film, minimizing retooling or requalification requirements for capacitor manufacturers.

How does temperature stability affect capacitor performance?

Higher thermal stability means capacitors can operate without derating in elevated temperature environments. This results in fewer components, reduced cooling needs, and longer operational life. This is critical for fusion energy, defense systems, and grid modernization.

When will NanoPlex LDF be commercially available?

Samples are now available throughout 2025–2026, with large-volume production planned for 2027 at Peak Nano’s U.S.-based manufacturing facility.

Why choose U.S.-manufactured film over imported film?

More than 70% of BOPP film is sourced from overseas, often with uncertain lead times and geopolitical risk. Peak Nano’s U.S.-based production provides a secure, compliant, and resilient supply chain for critical industries.

Ready to Evaluate NanoPlex Films?

Request a Sample Kit